Creative star hotel furniture custom-made actual measuring method

guangdong creative star hotel furniture custom-made actual measuring method

1. Opening measurement: before the design, production and installation client hotel furniture, should measure wooden door. Measurement should be based on the size of the floor and wall materials after decorating. If there is no complete floor and wall construction, to keep the thickness of the decoration materials.

2。 Confirm the opening width of the door: level, measuring the size of holes selected five measuring points, through the corresponding measure of vertical and horizontal measurement, with the minimum value of opening width size. If the rest of the four points measured value is greater than the minimum value, more than 20 mm, adjust the hole should be according to requirement.

3, the height of the door that frame method for determination of the method for determination of the height and width are basically the same. Vertical measurement of the size of the hole, select 3 points to measure, with the minimum value of the width of the door. The size of the measurement to had not been laid floor height, please note that the size of the Angle. If the remaining two measurement value is greater than the minimum 10 mm, adjust the hole should be based on requirement.

4, confirm the wall thickness of the door: measuring doorframe wall thickness as far as possible, a single shall not be less than 7 points. If the measured values is less than the maximum value of the remaining 6, more than 5 mm, adjust the hole should be according to the requirement.

above: star hotel furniture

5. Confirm the single side wall of the door opening size:

1) single side wall of the door opening and corresponding to the flat side wall wall thickness, the left and right are asymmetric structure. Will be added to the plane of the wall in the wall, the stable doors, assembly doorcase decoration bar. For door line of 60 mm, 35 - wall width need to increase 40 mm; For 80 mm wide door line, wall need to increase the 55 - wide 60 mm. The door cover cable must be close to the wall surface, do not increase the width of metope, otherwise it will affect the door covers the installation of the cable.

(2) wall, calculate the width should be in the standard after add wall surface measurement, measurement method and the steps are the same.

note: here to door line the perimeter as a benchmark, one side is a fixed position. Should consider when calculating reserve space.

(3), a shortcut: under the condition of without any increase in the walls, the walls of the flat screw 2 root according to the corresponding wall width 35 mm solid rods can also solve the problem.

6, identification of sliding doors opening size is the same as the above method.

above, summarize the relevant ideas in guangdong star hotel furniture custom-made actual measurement method, hope to be of help.

Whether it's automation or artificial intelligence, the rapid convergence of technology and business often determines custom furniture’s competitiveness.
TaoRong Furniture has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!
To stay in contact for latest review of custom furniture custom made furniture across the globe and find out quality products, just go to TaoRong Furniture.