Hotel furniture factory - Explain details hotel furniture installation and maintenance

we live outside the hotel, feel the hotel furniture? To tell the truth, the hotel is busy every day, regardless of the furniture do not clean, small make up think even if again good furniture also will wear, while general hotel furniture is custom is more, but in fact we are in the process of custom furniture installation need supervisor with your heart. At this point we have to know when to install custom hotel furniture details, if it is a bit more advanced hotel might claim to furniture, damage will be timely maintenance treatment, not some ordinary hotel. So here said the hotel furniture installation and maintenance, need how to do?

hotel furniture factory on hotel furniture installation details

1, when installation should pay attention to protect the other in the home position, because furniture general was the last play in home outfit process, Don't decorate more to protect the home goods) Installed, furniture, be about to do cleaning. Key protection object is: floor ( Especially the real wood floor) , the door, door, stairs, wall paper, wall lamp, etc.

2, keep health, if you are replacing the old furniture in the home, this is especially important, Decorate new friends can also do the overall cleaning) , because of the different finished products customized furniture furniture, a lot of things are installed in your home, is bound to have some punching, cutting, etc. , so there will always be some sawdust and dirt.

2, handle, handle, such as hardware installation: here is mainly to determine the installation position, with the most appropriate family can height or position, and not light figure is beautiful beautiful. Such as condole ark or increased cabinets handle must be installed in the bottom of the door, ground ark small cabinets, desk, must be put in the above.

3, another important aspect is, of course, in person to follow up the installation process, look to whether have the damage in the process of installation, in fact, this won't have too many questions, because the installation workers are experienced, also very carefully, if he broke your furniture, his company will have punishment on his personal.

5, the installation process may encounter many unexpected problems, is located in the furniture also has a lot of attention in the process of the installation place, said method before you helpful hints: general board type furniture, Without any type, pure wood structure) Furniture can DIY installation, but only some small furniture, such as shoe ark, small sit couch, etc. ; Big furniture, solid wood furniture, or there's a very complex modelling furniture, such as wardrobe, vestibular ark, etc. , is not suitable for DIY installation, no matter what brand of furniture.

6, the metope decorates pipeline: water and electricity transformation is indispensable in modern decoration, so metope, ceiling, roof and wall of the junction will have the possibility of pipeline buried in wall. Why do you want to mention it? Because of custom furniture installation and integral ambry actually very like, also have a condole ark, sometimes need to use heavy equipment such as electric hammer, if we don't know in advance where tube, cable, there will have to play offline, blow pipe may; Wire is good, but it's hard to make the conduit.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

hotel furniture factory on hotel furniture repair method

hotel furniture repair, repair paint 1

if the furniture paint is burning damage, toothpicks can be hard package on a layer of fine lines, gently wipe traces, and then coated with a thin wax, qiaogen be removed; If furniture paint scratches, available and the same color crayon or paint furniture, the furniture of the wound, the impression of covering exposed, and then use thin transparent nail polish coated with a layer of can, if the wax dripping on the furniture paint, don't use a sword stuck between or fingernails, should wait until the day when the light is good, with plastic sheets, hands clasped, lean forward, and the wax from the body before direction after shave their slowly, and then use cloth rub-up.

1, eliminate water mark, water droplets on furniture, if not immediately wipe, traces of water damage. To this, can use wet cloth cover on the traces, then press wet cloth electricity iron carefully several times, the water traces will meet thermal evaporation, water mark can be eliminated.

2, remove the old paint, if you want to get rid of the paint on furniture, can paint a failure of the developer on the lacquer face of furniture, can remove the old paint. After washing to dry, with a fine sandpaper smooth, can brush paint again.

3, to repair the dent, some because of the soft wood furniture, after the collision will leave pockmarks. At this time, can use a wet towel first in the sag, with iron heating ironing, can recover. If the dent is deeper, to join the fillings.

The use and installation of custom furniture is compared with most other systems for managing the custom made furniture effectively and no doubt custom furniture have won the race so many times.
Our knowledgeable loss prevention experts can help commercial customers reduce losses in custom furniture.
Individuals with varied technical skills use custom furniture in a wide range of applications.
Data has always been important in business, of course. But with the arrival of digital data—its volume, depth, and accessibility—it has become clear it is key to helping JiangSu TaoRong Furniture Co., Ltd. develop sustainable competitive advantage.
JiangSu TaoRong Furniture Co., Ltd. constantly discovers the demands of global market for developing a wide range of products applied in different use.