Hotel rooms selected five methods solid wood furniture

how to pick of solid wood furniture, hotel room for one of the most ordinary consumers, apparently without too much professional experience. Professional knowledge related to real wood furniture is more, but we don't need to buy a set of furniture to learn too many things. By following these steps, you can buy the same product, do not spend money at the same time. Professional knowledge related to real wood furniture is more, but we don't need to buy a set of furniture to learn too many things. By following these steps, you can buy the same product, do not spend money at the same time.

hotel furniture manufacturer understands that in the guarantee of visual enjoyment at the same time, must be strict control on the quality of the furniture. Strictly control the process, at the same time, establish a strict inspection and acceptance monitoring standards, ensure that every piece of furniture factory including warp, flatness, moisture content, pressure, corrosion resistance, resistance to heat and cold, and so on, the indicators are at the international advanced level. Finding fault with the high-quality goods, the following methods for your reference:

1, the touch surface

a set of solid wood furniture, after building up after a lot of polishing and coating process, again and again create a smooth effect. So the high quality product to the touch should be smooth, there will be no obvious AoTuGan, no burr phenomenon. In addition, you can press or gently shaking the furniture, the structure is stable, have the loose kuang's problems.

2, choose price

variety of solid wood furniture, is the price difference is very big, so the purchaser should determine at the outset of yourself to accept the price. Like most affordable pine wood and rubber wood furniture, are generally a few hundred yuan to two thousand yuan price. And if it is a high-grade oak or walnut furniture, the price is at the levels of thousands of yuan to twenty thousand yuan.

3, check the details

real solid wood furniture, the material itself is hard to avoid can have some small flaws, but also need by joining together to bulk products. And if a product's surface is too perfect, the furniture that stick a skin will be careful. Seams carefully check the details, and sometimes you can find traces of that stick a skin. Such furniture is not can't buy, but must value is not too high a price. Check the function of furniture, depends on whether the drawer is strong and firm, whether internally to tighten the screws. Should also pulled open the drawer, active desktop, cupboard, etc, each part to ensure can use freely, and properly connected. Determine whether the furniture is solid wood, a little secret is to observe wood grain and knot. If a cupboard door, wardrobe looks is a kind of decorative pattern, then correspond to the pattern change of position, look at the back door of cupboard of the corresponding pattern, if consistent pattern that is real wood cupboard door, the opposite is false. Similarly, observing knot, see if cupboard door on both sides of the scar.

4, see appearance

through the appearance to see how a set of furniture quality and workmanship. The more high quality material, the paint when will use varnish, even only use wood oil, namely can fully embody the real wood texture itself. While if it is less times of materials, and conference that mix oil, namely through the color of cover lumber itself defects. Solid wood furniture to have security and stability, when the two cupboard door open after 90 degrees, with the hand gently pull forward, to ensure that no cabinet put oneself in another's position automatic tilting forward, light Angle on the furniture or sitting on the side at the same time, try the furniture is solid. In addition with the hand petting furniture surface, carefully check whether the surface is smooth, especially to see the leg is coarse, in areas such as the paint is uniform, and so on.

5, choose material

the first thing to determine what is real wood furniture material, because this is the key factor of affecting the product quality and price. Solid wood furniture commonly used beech, white oak, manchurian ash, elm, Chinese catalpa wood, rubber wood, oak wood, and annatto furniture mainly adopts rosewood, chicken wing wood, rosewood. Consumers it is best to buy brand products, to ensure the quality of the product already so, also can enjoy the high quality service.

solid wood furniture market commodity name is confusion, so you need to look carefully at the time of choosing the real material. A set of solid wood wardrobe, for example, may use cheap back part of the wood, or simply use density board instead. In addition, as a kind of wood, the price is much higher than straight makeup that connect plate, at the same time, the function on the performance of use in furniture is totally different.