Hotel rooms wood stain treatment and cleaning

now many hotels are more concerned when undertaking decorating floor and real wood floor look more beautiful, and durable to use, but for real wood floor, people must pay attention to the nursing skills, to extend the service life of it more so, this article will specially introduce you to the hotel cleaning and nursing skills of wooden floor?

a stain, hotel rooms, wood processing

1, locally careless board face is stained with dirt, should keep clear of in time, if there is oil stains, can dip in with dishcloth or mop water, or a small amount of detergent to wipe, also can use neuter suds adds spirit of a few catharsis to swab.

2. If the surface of the floor layer by cigarette burning, need to use dip the soft cloth of furniture polish is wiped, forcibly can restore its light; If it is stained with ink, should be timely with paraffin soft cloth to wipe.

3, the paint floor after laid, reduce the sun to be basked in continuously as far as possible, in order to avoid too much paint by ultraviolet radiation, dry and aging in advance. Furniture is placed on the floor, with rubber, or other soft cushion, in case the score floor lacquer.

4, if the heat leak, or ground water damage, must be clean in time, can't let the sun to be basked in blasting, or directly use the electric stove roasted, lest dry too fast, floor craze.

5, if the stain is serious, with the high quality sand paper, or steel wire ball wiped gently; If it is a drug, drink, or paint stains, must be in smear without clear of before infiltration woodiness surface, dip in with dip the soft cloth of furniture polish is wiped. If still invalid, should dip in with steel ball furniture wax brush.

2, hotel rooms, wood floor cleaning

1, wooden floor should be used in the daily cleaning can wipe dry cotton mop, in case of stubborn stains, neutral cleaning solvent should be used to wipe with a dry cotton swab to wipe, after do not use the acid and alkaline scrubbing solvent or organic solvent such as gasoline. And don't put on the floor materials such as strong acid and strong alkali.

2, keep the floor dry, not wet mop mop the floor with water, or swab with buck, suds, lest destroy the brightness of paint film, damage.

3, such as when the weather is grey, or dirt, can use dry mop, or with twist dry wet mop to wipe, a month, Or two months) It is good to play a wax.

4, not for a long time, cover with plastic cloth or newspaper, a long time, the film will be sticky, and gradually lose its luster, and at the same time to avoid hot water pot, hot pot and other content directly on the surface, application of wood, or MATS, in order to avoid burning the paint film.

5, and prevent the fine particles scratch floor, tiny grains of sand stay for a long time the floor surface, after walking around, sand abrasion marks will appear in the floor surface. In addition to sand, dust, hard sharps shoes, metal, glass ceramics are floor & # 39; Skin & # 39; The bane of, in order to reduce the grain wear floor, keep the floor clean is especially important. Pay attention to clean the floor after a window ventilated, if find any dirt or gravel, should be instant vacuuming, cleaning.