Wood furniture production technology of spelling a flower

there are many different kinds of furniture style, different technological requirements, for all kinds of wood furniture, spelling a flower is always one of the many styles of people like, furniture wood parquet part generally go through grinding, brushing glue, cutting, stick a skin, ironing and other steps. First to furniture surface to be rough, rough cast is woodiness mesa have AoTuGan to let furniture, woodworking glue on the besmear after absorption ability is stronger, good adhesion, thus ensuring wood veneer use time long to also won't fall off, of course not steal work is thick, so bad for a few days although looks no difference, but for a long time will be prone to wood veneer peeling problem.

back history, wood craft, spelling a flower is actually due to the quality of wood for making furniture wood co. , LTD. If fully using fine wood, completely real wood production will make the production cost of furniture is very expensive, so the wisdom of the craftsmen have come up with will open into thin slices of wood stick a skin, spelling a flower, Mosaic, such production technology difficulty is increased a lot, but it can use of limited resources to accomplish more furniture production, but also because of this, today we can enjoy so many beautiful furniture spelling a flower, it is also 'scarce' bring a windfall of craftsmen!

spelling a flower furniture: use of broken material, first made certain specifications of the small pieces, such as rectangular wood, lozenge block, triangle, circle, etc. , fully dry, planing, then spell by, with cement casein glue or hide glue, glue, eventually plane light paint. Use small pieces of wood split, can form various geometric patterns, into all kinds of table, chair, sit by the board, box, etc. , can be Fang Keyuan, save material, and economical and beautiful.

artisans paint patterns on the surface of the furniture with pencil first, and then to separate individual airtight shape, pattern, such as wood shell pattern, palm leaves, god, and the child's head pattern, etc. Then for each pattern to choose a different kind of wood, again according to the edge of the pattern, will be cut wood. At the same time, another group of craftsmen according to the design pattern and carve out of the groove on the surface of the furniture, deserve to go up a closed shape is a groove, after thousands of pieces of wood are made, will be perfect inlaid wood and grooves.

a fine furniture surface spelling a flower, may use hundreds of different kinds of wood chip, but, we not only natural cohesion, and best select material, a pattern, also can achieve the effect of gradual change color and shadow rendering feeling, just like a piece of natural pictures, only under 30 ° oblique Angle, can vaguely see the trace of Mosaic. Coarse grinding after, is the brush woodworking glue, brush woodworking glue also is to have cultured very much oh, make sure carpentry when brushing glue glue evenly on the tea table surface, or stick out of the wood will be uneven, the face of tea table doesn't look smooth, not good-looking.

cut is refers to the tailoring of wood veneer, cutting is also very important for wood veneer, wood veneer can't cut too wide, also can't cut is too narrow, must be good accounting specific fine size before cutting, uneven thickness, or to cut the thickness ratio is wrong, or to cut cut too wide, carefully will cause the whole tea table surface beautiful degree, generally cutting wood veneer will be done before brushing glue, otherwise the woodworking glue dry, and you are not cut out good wood veneer, the work is in front of the white.

then stick a skin, stick a skin, I will pay attention to cut out the gaps between the good wood veneer, cannot careless, that post is not straight, or uneven gap, will influence the whole tea table's aesthetic. So must be careful to stick wood people daring, or may not be able to success in this seemingly simple stick wood work. Wood stick, in order to ensure the wood veneer and the adhesiveness of mesa is strong enough, enough also need in the ironing, pressing problems to control properly, the different wood veneer, different size, mesa is different to the requirement of temperature. Low temperature burns wood veneer, and bonding degree is not high, so the iron wood has sufficient experience must be a teacher. After that, if the product itself has no special requirements, general is to finish the polishing paint.

ensures that each component and the division of the details are the most professional art processing. Again, of course, because of the shape of the wood is different, the craft of wonderful artical excelling nature, there is no guarantee that they are one hundred percent fit, so craftsmen in wood Mosaic after this process, also need to fill glue ( Fill tiny gaps between the wood and wood) And polishing ( Make the surface smooth level off) And then up a transparent varnish, naturally, make the grain of wood to show the whole 'Mosaic parquet' process is perfect.

in addition, there are a lot of leather technology on the surface of the furniture, with the same piece of wood split in multiples of 2, 4 blocks or more and then to enchase collage, make furniture wood grain to reach the height of the symmetry. Different furniture manufacturer to this kind of technology also have different play: ColomboMobili golden palace style, for example, its furniture painting, then a 'Mosaic parquet' originated from the Italy, all the important historical period ( The period of the Roman empire and Adams, etc. ) , draw lessons from all kinds of classical furniture, trying to recreate history, its 'Mosaic' spelling a flower is a blend of various materials, showed the style of classical spirit.